DEALING WITH A SUDDEN WATER HEATER BREAKDOWN: STEPS TO TAKE

Dealing with a Sudden Water Heater Breakdown: Steps to Take

Dealing with a Sudden Water Heater Breakdown: Steps to Take

Blog Article

Top Article

Were you on the lookout for related information on Hot Water Heater Repair?


What Would Cause My Electric Water Heater to Stop Working?
Several modern-day residences take advantage of an electrical hot water heater for their heater, because of its benefit and convenience of use. Nonetheless, similar to any other electrical appliances, troubles may arise with its use, suddenly. It can be truly discouraging to awaken to a cool shower instead of a warm one or having your bathroom with water that isn't hot sufficient and even as well hot. Whatever the case may be, water heater problems can be quite nerve-racking. Fortunately, we have actually made a listing of possible solutions to your hot water heater issues. There are a variety of aspects that can trigger a lot of these troubles, it could be an issue with the power supply, the electric heating element, or the thermostat. Prior to doing anything, ensure you switch off the major power supply for safety. Whatever the trouble is, getting it taken care of should not present too much of a concern if you comply with these actions:

Call An Expert:


If after replacing all malfunctioning parts as well as resetting your temperature, the water heater still isn't functioning, you may require to get in touch with a specialist plumber for a professional opinion. The trouble with your heater could be that the hot and cold faucets have been changed or it might be undersized for the amount of warm water required in your house. Whatever the case may be, a specialist plumber would assist address the problem.

Inspect Your Power Supply:


As standard as this may appear, it is very needed. Without ample power, your water heater will certainly not operate. So the first thing to do when your water all of a sudden retires is to confirm that it isn't a power problem. Inspect if the fuse is blown out or the circuit breaker stumbled. If the breaker is the issue, simply turn it on and off once again. Change any damaged or worn-out fuse. Evaluate the device with power after these modifications to see if it's currently functioning.

Inspect Your Thermostat:


If your water heater still isn't functioning or the water appearing isn't warm enough, you might require to examine the temperature setups on your top thermostat. Ensure the circuit breaker is switched off before doing anything. Open up the gain access to panel and press the red button for temperature reset over the thermostat. This must aid warm the water. Transform the breaker back on and also examine if the trouble has actually been resolved.

Check the Heating Element in the Water Heater:


If it's not a power problem, then try taking a look at your heating element if it is still working. Test each of your heating elements to be sure the issue isn't with any one of them. If any one of them is malfunctioning, replace that component and then inspect whether the hot water is back on.

Final thought


Hot water heater issues are not constantly significant. Most of them result from small issues like a blown fuse or worn-out heating element. Changing the damaged parts ought to work. Nevertheless, if you are still incapable to address the trouble, give a call to your nearest plumber to come to get it fixed.


8 possible reasons why you have no Hot Water


Along with streaming Netflix and having light flood a room when we flick a switch, having hot water flow from our taps and showerheads whenever we want is an oft-overlooked modern miracle of homeownership. That's why, when that flow goes cold, it can be shocking — and not just in a "Wow, that's freezing" kind of way while you're in the shower.


Water Leak


Before hot water reaches your taps and showerheads, it needs to spend some time in your water heater. This appliance, which can be either gas- or electric-powered, takes the cold water that enters your home from your well or utility company and cooks it until it gets hot. It's akin to an electric tea kettle.



Obviously, if your water heater is leaking, it will never fill with water so it won't have anything to warm. To see if this is the case, simply examine the area around the water heater to see if it is wet. If so, you'll likely need to replace the unit, but you can also call in a pro for a second opinion and to see if it is fixable. Sometimes leaks can happen around fixtures on the water heater, and if so, the solution might be as simple as replacing them.


Gas Heater: Gas Leak


If your hot water is fueled by natural gas and there is a leak in the supply line or where the line enters the tank, the appliance won't have the power it needs to heat up your water. The result is not only inconvenient, but it can be extremely dangerous as well. If you smell gas when you investigate your water heater, call your gas utility company immediately and report it as an emergency. It might also be prudent to leave your home until a repair person from the company arrives. Your utility company will usually fix any kind of gas leak. However, in terms of getting your water heater working again, you'll need to relight the pilot and wait a while to see if it is functioning properly. You can call in a water heater specialist or plumber to help with this.


Gas Heater: Pilot Light Problems


There are two other issues with gas-powered water heaters that can lead to a loss of hot water. The first is a pilot light that's blown out. The pilot light is the source of a constant flame inside your water heater. When the heater determines the need to heat up the water it is holding, it will open a valve that will cause gas to flow over the pilot light and cause it to ignite. To see if your pilot light is functioning, there is usually a small window in the front of the water heater. If you can't see a flame, remove the access panel and see if that helps you locate it. If there is still no flame, you'll need to relight it in accordance with the manufacturer's instructions.



Your pilot light should burn with a bright blue flame. If not, make sure there are no drafts affecting it, which could keep it from functioning properly. If the flame looks yellow, it might be a sign of the presence of carbon monoxide, which spells trouble and needs to be looked at right away by a technician.


Gas Heater: Faulty Thermocouple


The second reason why a gas-powered water heater might fail is a faulty thermocouple. This is a small probe that should sit in the pilot light flame. Its purpose is to stop the flow of gas if it senses that the pilot light is out. Sometimes, these probes get knocked off track, so make sure it is directly in the flame. They can also get a buildup on them that prevents their function, so try cleaning yours off with some steel wool or fine-grit sandpaper. If your pilot light won't stay lit and you've tried these steps to fix the thermocouple, it is likely faulty and needs to be replaced. Call a technician.


Electric Heater: Breaker Blues


Electric water heaters don't have pilot lights, because there is no gas to burn in order to heat up the water. Instead, they do their magic through the use of (naturally) electricity. But that's not to say things can't go wrong with them. If your electric water heater isn't working properly, there's a good chance that a breaker was tripped that supplies the appliance power. Check your breaker box and flip any breakers that have switched to the off position back on. If it trips again, then there might be a fault in the water heater, and you'll want to call in a pro to have a look.


Electric Heater: Reaching The Limit


If the breaker is fine, check to see if the high-temperature limit has switched off on the water heater itself. To do so, first turn off the breaker to the unit. Then remove the service panel and press the red button you'll find there. This is the limit switch, and resetting it could solve your problem. To check, replace the panel, turn the breaker back on and listen to see if the water heater is functioning again.


Electric Heater: Heating Element


If these steps don't fix the issue, then you might have a failed heating element, which will need to be replaced. Unless you are comfortable with such repairs, calling in a technician might make the most sense.

https://www.homeserve.com/en-us/blog/home-improvement/no-water-heater/


No Hot Water — Water Heater Repair

I was shown that editorial on No Hot Water — Water Heater Repair from an associate on a different web property. Feel free to set aside a second to share this post if you appreciated it. We take joy in reading our article about How to Troubleshoot and Repair an Electric Water Heater.


Professional approach assured.

Report this page